Do you know that? 79% of Upwork-Elance freelancers work from home next

Contact Email:

See right interview answers on 30 common job interview questions

Collapse | Expand

1. Caching Your jQuery Objects?

You’re logging the various properties of the event object for a mousemove event, and the
  code lags behind because it uses $('.classname') selectors to find and update table
  cells with the event data.
  Your page contains this HTML code for the log:
  <table id="log">
  <tr><td>Client X:</td><td class="clientX"></td></tr>
  <tr><td>Client Y:</td><td class="clientY"></td></tr>
  <tr><td>Page X:</td><td class="pageX"></td></tr>
  <tr><td>Page Y:</td><td class="pageY"></td></tr>
  <tr><td>Screen X:</td><td class="screenX"></td></tr>
  <tr><td>Screen Y:</td><td class="screenY"></td></tr>
  and this JavaScript code:
  $('html').mousemove( function( event ) {
  $('.clientX').html( event.clientX );
  $('.clientY').html( event.clientY );
  $('.pageX').html( event.pageX );
  $('.pageY').html( event.pageY );
  $('.screenX').html( event.screenX );
  $('.screenY').html( event.screenY );
The page also contains a large number (thousands!) of other DOM elements. In a simpler
  test page, the code performs fine, but in this complex page it is too slow.
    Solution  Cache the jQuery objects returned by the $(...) calls, so the DOM queries only have
  to be run once:
  $clientX = $('.clientX'),
  $clientY = $('.clientY'),
  $pageX = $('.pageX'),
  $pageY = $('.pageY'),
  $screenX = $('.screenX'),
  $screenY = $('.screenY');
  $('html').mousemove( function( event ) {
  $clientX.html( event.clientX );
  $clientY.html( event.clientY );
  $pageX.html( event.pageX );
  $pageY.html( event.pageY );
  $screenX.html( event.screenX );
  $screenY.html( event.screenY );
  You may also be able to speed up those selectors considerably; see the next recipe for
  ways to do that. But simply calling them once each instead of over and over again may
  be enough of an improvement right there.
    Discussion  One of the classic ways to optimize code is to “hoist” repeated calculations out of a
  loop so you have to do them only once. Any values that don’t change inside the loop
  should be calculated one time, before the loop starts. If those are expensive calculations,
  the loop will then be much faster.
  This works just as well when the “loop” is a series of frequently fired events such as
  mousemove and the “calculation” is a jQuery selector. Hoisting the selector out of the
  event handler makes the event handler respond faster.
  Of course, if you’re calling multiple selectors inside a loop, that will also benefit from
  moving them outside the loop in the same manner.

2. Can we select a element having a specific class in jQuery ?

Yes, we can select an element with a specific class, we use the class selector.The class name must contain the prefix as "." (dot). 

<script language="javascript" type="text/javascript">  
         $(".class1").css("border", "2px solid red");  

Above code will select all the elements of the webpage containing the class as "class1" and apply the css style border width as 2 Pixel, style as solid and color as red.

3. Do we need to add the JQuery file both at the Master page and Content page as well?

No, if the Jquery file has been added to the master page then we can access the content page directly without adding any reference to it. 
  This can be done using this simple example 

<script type="text/javascript" src="jQuery-1.4.1-min.js"></script>

4. How to apply Sequential Effects?

You want an effect to occur on one set of elements after another effect occurs on a
  different set of elements. This is simple to solve if you just have one other effect to
  execute, but if you want to apply the effect one-by-one to any number of elements, the
  code could become difficult to maintain.
  Solution  This solution uses the standard template outlined at the beginning of this chapter,
  except that we have multiple copies of the element on the page. This solution
  is designed as such that we can be dealing with any number of elements, from
  just one single element to many, because the automatic sequence solution can handle
  them all.
  Manual callback
  The basic approach to applying sequential effects would be to use the callback. This
  would also be used if the next effect is different from the first:
  $(document).ready(function () {
  var $boxes = $('.box').hide();
  $('#animate').click(function () {
  $boxes.eq(0).fadeIn('slow', function () {

Automatic sequence  This alternative method, based on Dave Methvin’s solution, will repeat in sequence the
  effect on any number of elements:
  $(document).ready(function () {
  var $boxes = $('.box').hide(),
  div = 0;
  $('#animate').click(function () {
  $($boxes[div++] || []).fadeIn('slow', arguments.callee);
   Discussion  The simple solution uses the callback feature to then step in to the next animation in
  the sequence. The selector we use targets the first; however, this doesn’t scale
  because it is expecting there to be two and only two animated elements. Any less and
  the code breaks. Any more, and some elements will be missed.
  If we have many more, or even an unknown number of elements we need to animate
  in sequence, then Dave Methvin’s solution is perfect.
  There are two tricks to the code. The first is the failover to an empty array:
  $($boxes[div++] || [])
  This code increments the index counter, and if the element doesn’t exist, it passes an
  empty array to jQuery.
  When the jQuery result set is empty, running an animation doesn’t do anything. Since
  the result is empty, jQuery doesn’t pass any DOM elements to the chained call, and
  therefore any callbacks given to the chained method won’t be called either.
  For example, if we ran the following code, the alert box would never appear—which
  is a key ingredient to making this recipe work:
  $('made-up-element').show(function () {
  alert('will never appear');
  The second trick to this recipe is the callback argument:
  arguments is a keyword in JavaScript referring to a local variable that all functions have
  access to. The arguments object is similar to any array but does not have any of the array
  methods (such as slice) or properties except length.
arguments also contains a reference to the currently executing function in the
  arguments.callee property. This is useful for recursive function calls, which is exactly
  how we are using the property in this solution.
  This solution says to keep incrementing through the $boxes jQuery collection and, on
  completion of the animation, recursively execute the function. This continues until the
  <div> index goes beyond the length of the $boxes jQuery collection ($boxes.length), at
  which point an empty array is used as the jQuery collection, and thus the callback is
  not executed, causing the code to finish running.

5. How to Attach a Handler to Many Events?

In many common situations, one needs to bind the same handler function to more than
  one event (on the same element, that is). You could always do something like this:
  That is not such a problem if the function is short, but for longer blocks of code, repeating
  them over and over won’t be that trivial and is definitely not the best approach.

There’s more than a single solution to this simple but recurrent problem.
    One way to solve it without repeating yourself too much would be as follows:
    function handler(e){



Defining a function once and then referring to it multiple times is not a bad approach,
    but there’s an even simpler one provided by jQuery.
    bind() accepts a list of events separated by spaces. That means you can solve the previous
    problem like this:
    jQuery('div').bind'click keydown', function(e){
   Discussion    You can also apply this behavior to unbind() and one().
    To unbind a certain function, you need to have a reference to it, so even if you are using
    the multievent feature, you still need to keep a reference to the handler. If you don’t
    pass the function to unbind(), then any other event handler bound to that event will be
    removed as well:
    function handler(e){
    jQuery('div').bind('click keydown', handler);
    // ...
  jQuery('div').unbind('click keydown', handler);

6. How to Create, Operate, and Insert DOM Elements?

You want to create new DOM elements (or a single element) that are immediately
  selected, operated on, and then injected into the DOM.
  Solution  If you haven’t figured it out yet, the jQuery function is multifaceted in that this one
  function performs differently depending upon the makeup of the parameter(s) you send
  it. If you provide the function with a text string of raw HTML, it will create these
  elements for you on the fly. For example, the following statement will create an <a>
  element wrapped inside of a <p> element with a text node encapsulated inside of the
  <p> and <a> elements:
  Now, with an element created, you can use jQuery methods to further operate on the
  elements you just created. It’s as if you had selected the <p> element from the get-go in
  an existing HTML document. For example, we could operate on the <a> by using
  the .find() method to select the <a> element and then set one of its attributes. In the
  case of the following code, we are setting the href attribute with a value of http://
  This is great, right? Well, it’s about to get better because all we have done so far is create
  elements on the fly and manipulate those elements in code. We have yet to actually
  change the currently loaded DOM, so to speak. To do this, we’ll have to use the manipulation
  methods provided by jQuery. The following is our code in the context of an
  HTML document. Here we are creating elements, operating on those elements, and
  then inserting those elements into the DOM using the appendTo() manipulation
  <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
  <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
  <script type="text/JavaScript"
  <script type="text/JavaScript">

  Notice how I am using the end() method here to undo the find() method so that when
  I call the appendTo() method, it appends what was originally contained in the initial
  wrapper set.
   Discussion  In this recipe we’ve passed the jQuery function a string of raw HTML that is taken and
  used to create DOM elements on the fly. It’s also possible to simply pass the jQuery
  function a DOM object created by the DOM method createElement():
  jQuery(document.createElement('p')).appendTo('body'); //adds an empty p element
  to the page
  Of course, this could be rather laborious depending upon the specifics of the usage
  when a string of HTML containing multiple elements will work just fine.
  It’s also worth mentioning here that we’ve only scratched the surface of the manipulation
  methods by using the appendTo() method. In addition to the appendTo() method,
   there are also the following manipulation methods:   • append()
    • prepend()
    • prependTo()
    • after()
    • before()
    • insertAfter()
    • insertBefore()
    • wrap()
    • wrapAll()
    • wrapInner()

7. How to disabe All Effects?

Your user or web application may require that all animations are disabled, but the effect
  of revealing information or scrolling (or whichever animation type) may still be
  This may be a personal preference, the user may be using a low-resolution device, or it
  may be because the user finds the animations problematic in their browsing.
  jQuery has a way to disable all animations from one access point but still supports the
  animate method and its final value.
   Solution  $ = true;
  $(document).ready(function () {
  $('#animate').click(function () {
  $('.box').animate({ width: '+=100', height: '+=100' });
   Discussion  By setting fx to off using the following line, all animation calls have the same effect as
  calling css() directly:
  $ = true;
  This can be set at any point and it will disable the animations, which means it can be
  offered as a user preference. To enable animations again, you simply set the flag to
  $ = false;

8. How to Find the Dimensions of an Element?

You want to determine the space occupied by an element.
   Solution  The width and height methods can be applied to any element, and they are useful for
  determining the computed width or height of an element. However, they fall short if
  you need to determine the actual real estate that an element is occupying on the screen.
  In addition to width and height, jQuery provides the following methods for determining
  more specific dimensions of an element:
    innerWidth  Returns the width excluding the border and including the padding
     innerHeight  Returns the height excluding the border and including the padding
     outerWidth  Returns the width including both the border and the padding
     outerHeight  Returns the height including the border and including the padding

 Given the following HTML:  <div id="results"></div>
  <div id="myDiv">Some text.</div>
  and the following CSS:
  #myDiv {
  you could expect the following:
  jQuery(document).ready(function() {
  var $myDiv = jQuery('#myDiv');
  var $results = jQuery('#results');
  jQuery('<p>Computed width: ' + $myDiv.width() + '</p>')
  .appendTo($results); // 100
  jQuery('<p>Computed height: ' + $myDiv.height() + '</p>')
  .appendTo($results); // 30
  jQuery('<p>Inner width: ' + $myDiv.innerWidth() + '</p>')
  .appendTo($results); // 120
  jQuery('<p>Inner height: ' + $myDiv.innerHeight() + '</p>')
  .appendTo($results); // 50
  jQuery('<p>Outer width: ' + $myDiv.outerWidth() + '</p>')
  .appendTo($results); // 122
  jQuery('<p>Outer height: ' + $myDiv.outerHeight() + '</p>')
  .appendTo($results); // 52
  jQuery('<p>Document outer height: ' + jQuery(document).outerHeight() + '</p>')
  .appendTo($results); // NaN
  jQuery('<p>Document inner height: ' + jQuery(document).innerHeight() + '</p>')
  .appendTo($results); // NaN
  jQuery('<p>Window outer height: ' + jQuery(window).outerHeight() + '</p>')
  .appendTo($results); // NaN
  jQuery('<p>Window inner height: ' + jQuery(window).innerHeight() + '</p>')
  .appendTo($results); // NaN
    Discussion  The innerWidth/innerHeight and outerWidth/outerHeight methods are useful tools for
  determining the actual dimension that you’re after—the basic width and height methods
  are of limited use when you are trying to measure the actual real estate that an
  element with border and padding occupies on the screen.
  Note that using innerWidth, innerHeight, outerWidth, or outerHeight methods on
  jQuery(document) or jQuery(window) objects will return NaN

9. How to give alert message in jQuery on a Button Click ?

First, include jQuery in your application. 
  Drop a textbox in your .aspx page:- 

<input id="inputField" type="text" size="12"/> 

include a button also:- 
<asp:Button ID="Button1" runat="server" Text="get"/> 

Now, here's the script:- 

<script type="text/javascript">  
        $(document).ready(function () {  
            $('#Button1').click(function () {  

On the click of the button, an alert will be given containing the text in the text box.

10. How to Include All Size-Related Stylesheets in the Page, but Enable Only One at a Time?

<link rel="stylesheet" type="text/css" class="css_size small" href="size-small.css" />
  <link rel="alternate stylesheet" type="text/css" class="css_size large"
  href="size-large.css" disabled=true/>
  In this case, you would define the setSize function as follows:
  var setSize = function(size) {
  jQuery('link.css_size').each(function() {
  var $this = $(this);
  if ($this.hasClass(size)) {
  .attr('rel', 'stylesheet');
  } else {
  .attr('disabled', true)
  .attr('rel', 'alternate stylesheet');
  In this approach, all stylesheets are loaded at page load, and nothing new is fetched
  when switching from one stylesheet to another. This eliminates the delay caused by
  solution 2 but it also results in potentially unnecessary HTTP requests if your user is
  unlikely to need the alternate stylesheets.
   Discussion  There is no definitive answer to which of the three style-switching methods is the best.
  When choosing a method, you’ll want to consider how likely your users are to need a
  different stylesheet, how big your size-related stylesheets are, and how you prefer to
  manage your size-related styles. In many cases, the method from the first solution will
  be both sufficient and preferable.

11. How to Make Elements Visible by Sliding Them Up?

You want to slide the content block into view, but the UI design dictates that the content
  must slide upward when being revealed. The slideUp method would hide the element,
  reducing the height from the top position.
  To slide upward, we need to use CSS to position the element and then consider the
  content that we are revealing.
   Solution   HTML   We need to absolutely position the element we are animating to get it to stick to the
  bottom position so it can animate upward when revealing.
  To achieve this, we need to wrap the animating element in another <div> (or the element
  that suits your design) and give it a position: relative style. (This may also be
  position: absolute. We just need a defined position to trigger the position: abso
  lute on #revealUp to position relatively to; however, since we want the document to
  flow normally, we’ve used position: relative.)
  <div class="box">
  <div id="revealUp">
  <p>Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do
  eiusmod tempor incididunt ut labore et dolore magna aliqua.</p>
   CSS  Now we need to give the box element a relative position so that we can absolutely
  position #revealUp relative to it:
  .box {
  position: relative;
  #revealUp {
  position: absolute;
  overflow: hidden;
  display: none;
  bottom: 0;
  background-color: #c00;
  height: 0;
jQuery  We can toggle the #revealUp based on the element’s height. We’re going to longer
  lengths to animate the height upward (by checking the current height) rather than just
  using slideToggle()—but we’ll look at why in the discussion:
  $(document).ready(function () {
  $('#animate').click(function () {
  var $box = $('#revealUp');
  if ($box.height() > 0) {
  $box.animate({ height : 0 });
  } else {
  $box.animate({ height : '100%' });
   Discussion  This solution requires that we check the height of the box to then determine how we
  Notice how we don’t use slideToggle, which behind the scenes is very similar, if not
  the same as, using .animate({ height: 'toggle' }).
  The reason we’re not using the toggle is that for the toggle to work correctly, it needs
  to capture the real height from somewhere. As the element starts with a height of zero,
  jQuery has no way to work out what the full height is. If we used slideToggle, the
  #revealUp element appears briefly as a 1-pixel slither and then disappears again. This
  is because there’s no real height to animate to.
  Instead, we determine whether the height is great than zero and then animate the
  height accordingly. Since the element is nested within another element with
  position: relative, we can give it a height of 100 percent, and it will grow to fill the

12. How to Make Your Pages Accessible?

You’re building a web application with complex widgets and lots of Ajax functionality,
  but you want to accommodate visitors with disabilities.
   Solution  Add keyboard accessibility and Accessible Rich Internet Applications (ARIA) semantics
  to your widgets. In the following code, the changes to support these features are indicated
  in bold:
  <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
  <html xmlns="" xml:lang="en" lang="en">
  <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
  <meta http-equiv="Content-Language" content="en-us" />
  <title>Dialog Demo</title>
  <style type="text/css">
  table {
  border-collapse: collapse;
  width: 500px;
  th, td {
  border: 1px solid #000;
  padding: 2px 5px;
  .dialog {
  position: absolute;
  background-color: #fff;
  border: 1px solid #000;
  width: 400px;
  padding: 10px;
  .dialog h1 {
  margin: 0 0 10px;

.dialog .close {
  position: absolute;
  top: 10px;
  right: 10px;
  <script type="text/javascript"
  <script type="text/javascript">
  $(document).ready( function() {
  function close() {
  var title = $('<h1>Add User</h1>')
  .attr('id', 'add-user-title'),
  closeButton = $('<button>close</button>')
  content = $('<div/>')
  dialog = $('<div/>')
  role: 'dialog',
  'aria-labelledby': 'add-user-title'
  .keypress(function(event) {
  if (event.keyCode == 27) {
  $('#add-user').click(function() {
  var height = dialog.height(),
  width = dialog.width();
  top: ($(window).height() - height) / 2
  + $(document).scrollTop(),
  left: ($(window).width() - width) / 2

+ $(document).scrollLeft()
  return false;
  <a id="add-user" href="add.html">add a user</a>
  <th>First Name</th>
  <th>Last Name</th></tr>

We’ve added several useful features with just a small amount of additional code:
  • We added ARIA semantics (role and aria-labelledby) so that assistive technology
  devices such as screen readers know that our <div> is a dialog and not just additional
  content on the page.
  • We placed the keyboard focus in the dialog’s first input field when it opens. This
  is helpful for all your visitors, sighted and nonsighted alike.
  • We moved the keyboard focus back to the Add Users link when the dialog closes.
  • We allowed the dialog to be canceled with the Escape key.
   Discussion  ARIA is a work in progress, so browser and screen reader support for it is still limited.
  But by adding it now, you’ll be better prepared for those visitors who can use it. And
  improved keyboard access benefits all your visitors.

13. How to Position an Element at Its Current Position Absolutely?

You want to turn a static or relatively positioned element into being absolutely
     Solution  To accomplish this, we simply get the position of the element and then use it to set the
  element’s CSS properties accordingly:
  var $myElement = jQuery('#foo p').eq(0),
  elPosition = $myElement.position();
  position : 'absolute',
  top :,
  left : elPosition.left
  We can also easily reposition an element relative to its current position:
  var $myElement = jQuery('#foo p').eq(1),
  elPosition = $myElement.position();
  position : 'absolute',
  top : + 20,
  left : elPosition.left + 20

14. How to Position an Element Relative to Another Element?

You want to position a new element relative to an existing element.
  Solution:  Get the width, height, and offset of the existing element, and use the values to position
  the new element accordingly.
  Given the following HTML:
  #foo {
  width: 300px;
  height: 100px;
  border: 1px solid red;
  padding: 5px;

#tooltip {
  border: 1px solid black;
  padding: 5px;
  background-color: #fff;
  <div id="foo">An existing element</div>
  the following code would add an element as a sibling to the existing element but positioned
  “inside” the element, 10 pixels from the top and 10 pixels from the left of the
  existing element’s top-left corner, and with a width 20 pixels less than that of the
  existing element:
  jQuery(document).ready(function() {
  var $foo = jQuery('#foo'),
  fooPosition = $foo.position(),
  $tooltip = $('<div id="tooltip">A new element</div>').insertAfter($foo);
  position : 'absolute',
  top : + 10,
  left : fooPosition.left + 10,
  width : $foo.width() - 20
  If you wanted to add the new element somewhere else in the page—that is, if you didn’t
  want it to be a sibling of the existing element—you could adjust your code to look at
  the offset of the original element rather than the position:
  jQuery(document).ready(function() {
  var $foo = jQuery('#foo'),
  fooOffset = $foo.offset(),
  $tooltip = $('<div id="tooltip">A new element</div>').appendTo('body');
  position : 'absolute',
  top : + 10,
  left : fooOffset.left + ($foo.width() / 2),
  width : $foo.width() - 20

15. How to set Page Title using jQuery ?

   $(document).attr("title", "Dotnet Funda");  

16. How to Slide and Fade Elements in and out of View?

We want to reveal or toggle a block of content into view. This can be triggered by the
  user clicking some element or can be fired by some other event.
  Rather than just showing and hiding, which could be jarring visually, we want to create
  a gradual effect to reveal the content into view.
  For these solutions, I’ve assumed we want to allow the user to toggle the effect.
   Solution  For reference, if we were just to show the element, our code would be as follows:
  $(document).ready(function () {
  $('#animate').click(function () {
  If we were to toggle the box but just toggle from visible and hidden, we would use the
  following instead of .show():
  However, our solution wants to be a little more visually engaging than just toggling the
  display property. So, let’s look at using the slide and fade methods:

 Slide  $(document).ready(function () {
  $('#animate').click(function () {
   Fade  Because there’s no opacity toggle function, either we can use a combination of
  fadeIn and fadeOut:
  $(document).ready(function () {
  $('#animate').click(function () {
  var $box = $('.box');
  if ($':visible')) {
  } else {
  or we can create our own fade toggle animation, using the fadeTo method:
  $(document).ready(function () {
  $('#animate').click(function () {
  $('.box').fadeTo('slow', 'toggle');
  However, I’m of the opinion that it reads better for future maintenance if we use the
  animate method:
  $(document).ready(function () {
  $('#animate').click(function () {
  $('.box').animate({ opacity : 'toggle' }, 'slow');
   Both  If we want to toggle the height and opacity together, we can reuse the previous
  solution and add the height to toggle at the same time. This would cause the box to
  fade out and slide up at the same time:
  $(document).ready(function () {
  $('#animate').click(function () {
  opacity : 'toggle',
  height: 'toggle'
  }, 'slow');

Discussion  As we can see from the previous solutions, the slide and fade methods are the next step
  up from the straight show (and hide) and toggle methods. The slide methods come in
  the following flavors:
   • slideUp    • slideDown    • slideToggle  The fade methods don’t have an explicit toggle feature, but it can be achieved. Fading
  has the following methods:
    • fadeIn    • fadeOut    • fadeTo  With the exception of fadeTo, all these methods take speed as the first parameter and
  a callback function as the second—both of which are optional. The callback function
  is executed once the animation is complete, and the context is set to the element the
  animation ran against; i.e., the this variable is the current element.
  The reason I would choose to use animate over fadeTo to toggle opacity is that the
  fadeTo parameters read the wrong way around. If a new developer were coming to the
  code, using the animate function almost reads as plain English, therefore making it
  easier to skim and understand what is happening in the code.

17. How to Slide and Fade Elements Simultaneously?

When some part of the web page is hidden and is shown to the user only on a specific
  action, sometimes a simple show/hide isn’t enough. We want to create more pleasing
  effects for our visitors.
  Depending on the layout of the page, an instant show/hide effect may not make it
  entirely clear to the visitor what content was revealed. This is another advantage of
  sliding an element into view because it gives a visual cue to the visitor where the page
  layout is changing.  

 Solution  Use the animation function to toggle both the height and the opacity at the same time:
  $(document).ready(function () {
  $('#animate').click(function () {
  $('.box').animate({ opacity: 'toggle', height: 'toggle' });
  return false;

Discussion  Using the animate method allows us to specify exactly which CSS properties we want
  to animate for the effect.
  We are also using toggle as the end point value. This way, the animate method takes
  the current height in the initial state and toggles it to either zero or 100 percent of the
  initial state.
  In our example, the initial state of the box is visible. If we want it to slide and fade
  into view, then we only need to set the display property to none in the stylesheet.
  Warning: there is no need to set the height to zero in the style; in fact, doing so will
  mean the animate won’t expand to the correct height because it will toggle back and
  forth between zero height (from the CSS) and zero height and display none (the final
 point of slideUp).

18. How to Stop and Reset Animations?

If an animation is running, we may be required to stop it in midflow. A common problem
  is seen when using a mouseover and a mouseout to trigger an animation to show
  and hide a particular block of content.
  If the mouse is run in and out of the trigger area, the animation continuously triggers;
  for example, the content block would keep sliding up and down until it completed the
  number of times it was triggered.
  One approach could be to use the :animated selector to filter out the element for animation.
  However, you may want to fade an element back out of view when the user
  moves the mouse away from the trigger rather than letting it complete. This can be
  solved with the stop() method.

Solution  We have added a CSS style to the element to set the opacity to zero.
  Instead of having the user click the button to trigger the effect, we’re running the animation
  when the mouse hovers over the button. This is just to show that without the
  stop() calls, the animation would run out of control:
  $(document).ready(function () {
  $('#animate').hover(function () {
  $('.box').stop().fadeTo(200, 1);
  }, function () {
  $('.box').stop().fadeTo(200, 0);
    Discussion  Typically this problem would be solved using a combination of fadeIn() and
  fadeOut(). However, if this were used, firstly without stop(), then the effect keeps
  repeating each time the mouse hovers over the button.
  To prevent this, we insert the stop() command before queuing on the next animation.
  The big advantage of this is that it stops the animation midflow. This means if the
  opacity of the element is at 0.5 (or 50 in IE), it will proceed with the next animation
  with the starting point of 0.5.
  Since we are now stopping in the middle of the opacity animation, it also means we
  can’t properly use fadeIn() and fadeOut(). We have to explicitly state where we want
  to fade to. So, now we are using fadeTo(), passing in the duration and then the target
  Now when the user moves their mouse back and forth over the button, the animation
  doesn’t repeat but fades in and out in a single smooth transition.

19. How to Switch Stylesheets Based on Browser Width?

You want to change the document’s CSS based on the width of the browser         Solutions:    There are a few solutions to this problem. One changes the class attribute of the body
    element, another changes the href attribute of the stylesheet you want to change, and
    the third includes all size-related stylesheets on the page but enables only one of them
    at a time.
    In each case, we’ll create a function that checks the width of the browser and bind that
    function to the document’s ready event and to the window’s resize event. The
    checkWidth function will then call the setSize function, which we’ll define based on the
    approach we’re taking:
    var checkWidth = function() {
    var browserWidth = $(window).width();
    if (browserWidth < 960) {
    } else {
    jQuery(document).ready(function() {
    The definition of the setSize function depends on how you want to switch styles.
      Solution 1: Changing the Class on the Body Element
    var setSize = function(size) {
    var $body = jQuery('body');
    jQuery('body').removeClass('large small').addClass(size);
      Solution 2: Changing the href Attribute of the Stylesheet That’s Responsible
    for Size-Related Styling
    Let’s assume you have the following size-related stylesheet in your document:
    <link rel="stylesheet" type="text/css" id="css_size" href="size-small.css" />
    In this case, you would define the setSize function as follows:
    var setSize = function(size) {
    var $css = jQuery('#css_size');
    $css.attr('href', 'size-' + size + '.css');
    Note that in this case, the new CSS file is requested from the server, which is likely to
    cause a brief delay in the style change occurring. For this reason, this is perhaps the
  least-preferable method.

    Solution 3: Include All Size-Related Stylesheets in the Page, but Enable Only
    One at a Time
    <link rel="stylesheet" type="text/css" class="css_size small" href="size-small.css" />
    <link rel="alternate stylesheet" type="text/css" class="css_size large"
    href="size-large.css" disabled=true/>
    In this case, you would define the setSize function as follows:
    var setSize = function(size) {
    jQuery('link.css_size').each(function() {
    var $this = $(this);
    if ($this.hasClass(size)) {
    .attr('rel', 'stylesheet');
    } else {
    .attr('disabled', true)
    .attr('rel', 'alternate stylesheet');
    In this approach, all stylesheets are loaded at page load, and nothing new is fetched
    when switching from one stylesheet to another. This eliminates the delay caused by
    solution 2 but it also results in potentially unnecessary HTTP requests if your user is
    unlikely to need the alternate stylesheets.
    There is no definitive answer to which of the three style-switching methods is the best.
    When choosing a method, you’ll want to consider how likely your users are to need a
    different stylesheet, how big your size-related stylesheets are, and how you prefer to
    manage your size-related styles. In many cases, the method from the first solution will
  be both sufficient and preferable.

20. How to upload Files in the Background?

File upload is part of many web applications but badly supported by browsers. The
  biggest problem is the lack of feedback of the upload status, while any action of the
  users disrupts the upload. A simple progress bar could improve the feedback but requires
  quite some work on the server side, while the problem of disruptive actions
    Solution  To improve the situation, file uploads should be performed in the background. This
  allows the application to continue accepting other user input.
  The jQuery form plugin makes it trivial to switch from the native browser upload to
  Ajax background uploading. With this form:
  <form id="uploadform">
  <input type="file" id="fileupload" name="fileupload" />
  <input type="submit" value="Upload!" />
  all you need to add is a call to ajaxForm:

However, just doing the upload in the background without any feedback of the completed
  upload isn’t enough, so we use the success option to display an alert about the
  successful upload:
  success: function() {
  alert("Upload completed!");
    Discussion  The ajaxForm method binds itself to the submit event of the form, which allows it to
  also include the button used to submit the form in the Ajax request. The latter isn’t
  available when using ajaxSubmit. The ajaxSubmit method is useful on its own when the
  form submit is handled elsewhere, for example, by the validation plugin. To integrate
  validation and Ajax submit, ajaxSubmit should be used in the submitHandler option:
  submitHandler: function(form) {
  success: function() {
  alert("Thanks for your comment!");
  In addition to the alert, the clearForm method, also provided by the form plugin,
  removes all values from the form. This makes it easy for the user to upload another file.

21. How to use jQuery and Ajax togeher?

You want to make a request to the server for some additional data without leaving the
  page the visitor is currently on.
   Solution  Here’s a simple Ajax request:
  (function($) {
  $(document).ready(function() {
  $('#update').click(function() {
  type: 'GET',
  url: 'hello-ajax.html',
  dataType: 'html',
  success: function(html, textStatus) {
  error: function(xhr, textStatus, errorThrown) {
  alert('An error occurred! ' + ( errorThrown ? errorThrown :

xhr.status );
   Discussion  At the core of jQuery’s Ajax architecture is the jQuery.ajax() method. This provides
  the basis of all browsers to server requests and responses. So, let’s look at this in a little
  more detail. To initiate a request to the server, a settings object that contains parameters
  for the request is passed to the $.ajax method. A vast number of options are available,
  with the most common options of a request being type, url, complete, dataType,
  error, and success:
  var options = {
  type: 'GET'
  The first option that needs to be addressed when starting an Ajax request is the type of
  HTTP request you’re going to make to the server, which in the majority of cases will
  be either a GET or POST type:
  var options = {
  type: 'GET',
  url: 'hello-ajax.html',
  dataType: 'html'
  Next we’ll look at the URL and dataType options. URL is fairly self-explanatory with the
  following interactions worth noting. When setting the cache option to false, jQuery
  will append a get variable of _=<random number> (for example /server-ajax-gateway?
  _=6273551235126), which is used to prevent the browser, proxies, and servers from
  sending a cached response. Finally, the dataType option specifies the data format that
  is the expected response from the server. For example, if you’re expecting the server to
  return XML, then a value of xml would be appropriate:
  var options = {
  type: 'GET',
  url: 'hello-ajax.html',
  dataType: 'html',
  error: function(xhr, textStatus, errorThrown) {
  alert('An error occurred! ' + errorThrown);
  success: function(data, textStatus) {
  $('body').append( data );
  The next two options that we define are two callback methods, one called error and
  the other called success. They function as they are appropriately titled, with error being
  called when there is an error with the request and success being called with a successful

response (determined if a server response type of 200 is returned). The other common
  option mentioned is the complete option, which defines a callback to execute upon after
  either success or error of the response:
  var options = {
  type: 'GET',
  url: 'hello-ajax.html',
  dataType: 'html',
  complete: function(xhr, textStatus) {
  // Code to process response
  Once the settings have been defined, we can go ahead and execute our request:
  var options = {
  type: 'GET',
  url: 'hello-ajax.html',
  dataType: 'html',
  complete: function(xhr, textStatus) {
  // Code to process response
  $.ajax( options );
  We can also set our options inline:
  type: 'GET',
  url: 'hello-ajax.html',
  dataType: 'html',
  complete: function(xhr, textStatus) {
  // Code to process response
  Our final solution requests the file hello-ajax.html and appends the contents (html)
  to the <body> element upon the return of a successful request. If the request fails, the
  error method is triggered instead, alerting the user with a message:
  (function($) {
  $(document).ready(function() {
  $('#update').click(function() {
  type: 'GET',
  url: 'hello-ajax.html',
  dataType: 'html',
  success: function(html, textStatus) {
  error: function(xhr, textStatus, errorThrown) {
  alert('An error occurred! ' + errorThrown);

22. how to use jQuery for Progressive Enhancement?

You want to build a site that allows simple task management with a great user experience
  using animations and Ajax, but you also want to support users who have JavaScript
    Solution  You can build the site to work without all the flashiness and then unobtrusively add
  the JavaScript functionality:

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"


<html xmlns="" xml:lang="en" lang="en">


<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />

<meta http-equiv="Content-Language" content="en-us" />

<title>Task List</title>

<script type="text/javascript"


<script type="text/javascript">
  $(document).ready( function() {
  var url = $('form').attr('action');
  $(':checkbox').click(function() {
  $.post(url, + '=1');
  $(this).parent().slideUp(function() {
  <form method="post" action="tasklist.html">
  <input type="checkbox" name="task1" id="task1" />
  <label for="task1">Learn jQuery</label>
  <input type="checkbox" name="task2" id="task2" />
  <label for="task2">Learn Progressive Enhancement</label>
  <input type="checkbox" name="task3" id="task3" />
  <label for="task3">Build Great Websites</label>
  <input type="submit" value="Mark Complete" />
  The input form in this page doesn’t require JavaScript. The user checks off the tasks
  he has completed and submits the form, and then it would be up to the server to load
  a new page with the completed tasks removed from the list.
  Now, we can progressively enhance the page using jQuery: we bind an event handler
  to the checkboxes that mimics a standard form submit, by getting the submit URL for
  the form and generating POST data showing that the checkbox was checked. Then we
  animate the removal of the task to provide feedback to the user. We also hide the submit
  button because marking tasks complete has become an instantaneous process.
  Discussion  Although few people browse without JavaScript these days, it’s still a good practice
  when possible to build your pages so they work fine without JavaScript and then use
 jQuery and JavaScript to enhance them.

23. How to Use Object's Methods as Event Listeners?

You have objects with methods and attributes, and you want to pass those methods
  (functions) as event handlers. The problem is that once you do this, the method will
  “lose the reference” to the object, and you have no way of referencing the object within
  the event handlers.
   Solution  This used to be quite complicated to achieve. It required you to generate closures that
  would encapsulate the object and then pass them to bind().
  Since jQuery 1.3.3, a new parameter has been added to bind(). It allows you to specify
  an object as the scope or this of the event handler without using function closures.
  This makes the required code both shorter and faster. You can now pass the object’s
  method as the function and the object itself as the scope.
     Discussion  Where did the node go?
  You will surely wonder this sooner or later. I said before that when you pass a scope
  object to bind(), the this of the event handler will be overridden. This means we can’t
  retrieve the node as we always do...but the node is not lost.
  When you pass a scope object to the bind() method, events will be delivered with the
  this of the event handler set to the scope object. You can still determine the element
  being delivered to the event by using the event.currentTarget property, which contains
  a reference to the DOM element.
  It’s usually not needed because using the this is shorter, but in situations like this, it’s
  the only way around.

 The example  I’ll create a small example that should illustrate how to use the scope parameter and
  also show you a situation where it is useful.
  For the example, we’ll need two objects. Each will have a method that we
  want to bind as an event handler.
  These are the objects:
  function Person(name){ = name;
  this.married = false;
  jQuery.extend( Person.prototype, {
  whatIsYourName: function(){
  updateMarriedState: function(e){
  var checkbox = e.currentTarget;
  this.married = checkbox.checked;
  var peter = new Person('Peter');
  var susan = new Person('Susan');
  Let’s suppose we have some sort of form and it has two checkboxes
  (#c1 and #c2). Each will manipulate the married state of one of our previous objects.
  jQuery('#c1').bind('change', peter.updateMarriedState, peter);
  jQuery('#c2').bind('change', susan.updateMarriedState, susan);
  Thanks to the scope attribute, we don’t need to create new functions for each binding;
  we can use the objects’ methods instead.
  The methods don’t even need to be attached to the objects in the first place. You could
  do something like this:
  function updatePersonMarriedState(e){
  var checkbox = e.currentTarget;
  this.married = checkbox.checked;
  jQuery('#c1').bind('change', updatePersonMarriedState, peter);
  jQuery('#c2').bind('change', updatePersonMarriedState, susan);
  As you can see, you’re not really forced to put those functions into the objects’ prototype,
  and it could actually make more sense to keep them separated. Why should a
  method belonging to Person know about checkboxes and the node? It’s probably nicer
  to keep all the specific DOM manipulation apart from the data.
  In some cases, the object’s method won’t need to know about the node or the event
  object at all. When this happens, we can bind a method directly, and we won’t be
  mixing DOM and data at all.

If we had to have make two buttons (#b1 and #b2) to display the name of one person
  when clicked, then it’d be as simple as this:
  jQuery('#b1').bind('click', peter.whatIsYourName, peter);
  jQuery('#b2').bind('click', susan.whatIsYourName, susan);
  It’s worth mentioning that both methods are actually the same:
  peter.whatIsYourName == susan.whatIsYourName; // true
  The function is created only once and saved into Person.prototype.

24. How will you Encode/Decode URL in jQuery ?

In jquery, you can use the following functions to encode and decode url :- 

encodeURIComponent(url) and decodeURIComponent(url)

You have to pass the complete url with parameterized value in the function and in return it will encode/decode you url for you !

25. Is it good to load jquery from CDN(Content delivery network) ?

Yes, it is always good to load your jquery from content delivery network. It provides some benefits like :- 
  (1) Caching - It means that if any previously visited site by user is using jQuery from Google CDN then the cached version will be used. It will not be downloaded again. 
  (2) Reduces load - It reduces the load on your web server as it downloads from Google server's. 
  Example :- 

<script  type="text/javascript"  

26. jQuery Core concept?

jQuery accepts a string enclosed with double quote (“”) that can contain a CSS selector which is used to match a set of elements on the web page. 
  jQuery code can start with either “jQuery” word or a “$” (dollar symbol). Take a look at below code snippet 

<script language="javascript" type="text/javascript">  
                  $(function () {  
                       jQuery("#div1").css("border", "2px solid red");  


<script language="javascript" type="text/javascript">  
          $(function () {  
                  $("#div1").css("border", "2px solid green");  

Both above code snippets are functionally same and do the same thing. So you can either user jQuery or $ when you are writing jQuery code.

27. JQuery is JavaScript Library or JSON Library?

JQuery is a javascript library not JSON Library. Jquery library is single JavaScript file that contains Common DOM, event effects and Ajax functions. 
  "JQuery is a library of javascript function." 
  For more Info:

28. What are Selectors in jQuery mean ?

Generally in HTML, if we need to work with any control on a web page we need to find the control. For that we use document.getElementByID or document.getElementByName. But in jquery we do it using Selectors. 
  Using this selectors we can select all the controls as well using a symbol (* ) 
  A sample code snippet can be of this form 

<script language="javascript" type="text/javascript">  
$("*").css("border", "10px red");  

This will make all the borders in the web page with a width of 10 pixel and color as red.

29. What does .size() method of jquery return ?

.size() method of jquery returns number of element in the object. That means that you can count the number of elements within an object. 
  For example :- 

 var Count = $("div").size();  

30. What is CDN and how jQuery is related to it?

CDN - It stands for Content Distribution Network or Content Delivery Network. 
  Generally, a group of systems at various places connected to transfer data files between them to increase its bandwidth while accessing data. The typical architecture is designed in such a way that a client access a file copy from its nearest client rather than accessing it from a centralized server. 
  So we can load this jQuery file from that CDN so that the efficiency of all the clients working under that network will be increased. 
  Example : 
  We can load jQuery from Google libraries API 

<script type="text/javascript" language="Javascript" 

31. What is the advantage of using the minified version of JQuery rather than using the conventional one?

The advantage of using a minified version of JQuery file is Efficiency of the web page increases. 
  The normal version jQuery-x.x.x.js has a file size of 178KB 
  but the minified version jQuery.x.x.x-min.js has 76.7 KB. 
  The reduction in size makes the page to load more faster than you use a conventional jQuery file with 178KB

32. What is the difference between jquery.size() and jquery.length ?

jquery.size() and jquery.length both returns the number of element found in the object. But, jquery.length is faster than jquery.size() because size() is a method but length is a property . 
  So, there is always an overhead in calling a function.

33. What is the use of Delegate() Method in jQuery?

The delegate() method can be used in two ways. 
 1) If you have a parent element, and you want to attach an event to each one of its child elements, 

this delegate() method is used. 
  Ex:Un-ordered List 
  Instead of attaching an event to each <li> element, you can attach a single event to <ul> element. 

$("ul").delegate("li", "click", function(){  

2) When an element is not available on the current page, this method is used. 
.live() method is also used for the same purpose but, delegate() method is a bit faster. 


$("ul").delegate("li", "click", function(){  

 This will hide any list items that are not currently available on the page. They may be loaded via an 

Ajax request and then append to it.

  Using .bind() or .click() methods, you would have to manually attach events to these new list items once they are added.

34. What?s Wrong with $(this)?

Solution:  Save this in a variable before calling setTimeout():
  $(document).ready( function() {
  $('.clicky').click( function() {
  var element = this;
  setTimeout( function() {
  }, 1000 );
  Even better, since you’re calling $() in both places, follow the advice in Recipe 5.3 and
  copy $(this) to a variable instead of this:
  $(document).ready( function() {
  $('.clicky').click( function() {
  var $element = $(this);
  setTimeout( function() {
  }, 1000 );
    Discussion  What is $(this) anyway, and why doesn’t it always work? It’s easier to understand if
  you separate it into its two parts, $() and this.
  $() looks mysterious, but it really isn’t: it’s just a function call. $ is a reference to the
  jQuery function, so $() is simply a shorter way to write jQuery(). It’s just an ordinary
  JavaScript function call that happens to return an object.
  If you’re using another JavaScript library that redefines $, that’s a different
  matter—but then you wouldn’t use $() in your jQuery code;
  you’d use jQuery() or a custom alias.
  this is one of the more confusing features in JavaScript, because it’s used for so many
  different things. In object-oriented JavaScript programming, this is used in an object’s
  methods to refer to that object, just like self in Python or Ruby:
  function Foo( value ) {
  this.value = value;
  Foo.prototype.alert = function() {
  alert( this.value );

var foo = new Foo( 'bar' );
  foo.alert(); // 'bar'
  In the code for a traditional onevent attribute, this refers to the element receiving the
  event—but only in the attribute itself, not in a function called from the attribute:
  <a href="#" id="test" onclick="clicked(this);">Test</a>
  function clicked( it ) {
  alert( ); // 'test'
  alert( ); // undefined
  alert( this === window ); // true (what?)
  As you can see from the third alert(), this is actually the window object inside the
  function. For historical reasons, window is the “default” meaning of this when a function
  is called directly (i.e., not called as a method of an object).
  In a jQuery event handler, this is the DOM element handling the event, so $(this) is
  a jQuery wrapper for that DOM element. That’s why $(this).addClass() works as
  expected in our “Problem” code.
  But the code then calls setTimeout(), and setTimeout() works like a direct function
  call: this is the window object. So when the code calls $(this).removeClass(), it’s actually
  trying to remove the class from the window object!
  Why does copying this or $(this) into a local variable fix this? (Pun intended.) Java-
  Script creates a closure for the parameters and local variables of a function.
  Closures may seem mysterious at first, but they really boil down to three simple rules:
  • You can nest JavaScript functions one inside another, with multiple levels of
  • A function can read and write not only its own parameters and local variables but
  also those of any functions it’s nested in.
  • The previous rule always works, even if the outer function has already returned
  and the inner function is called later (e.g., an event handler or setTimeout()
  These rules apply equally to all functions, both named and anonymous. However,
  this is not a function parameter or local variable—it’s a special JavaScript keyword—
  so these rules do not apply. By copying the value of this into a local variable, we take
  advantage of the closure to make that value available in any nested functions

35. Why do $clientX and the other variable names begin with the $character?

a letter of the alphabet. It’s simply a popular convention in jQuery code
  to use the $ prefix as a reminder that the variable contains a reference
  to a jQuery object and not, say, a DOM element, because a variable
  name of $foobar has a visual resemblance to the jQuery operation
  This is especially helpful when you need to use both a jQuery object and
  its underlying DOM element, e.g.:
  var $foo = $('#foo'), foo = $foo[0];
  // Now you can use the jQuery object:
  // or the DOM element:
  var id =;

36. Would it be even faster to use a while loop or a do...while loop?

You could rewrite the previous loop as follows:
  var i = −1, n = array.length;
  while( ++i < n ) {
  var item = array[i];
  // do stuff with item
  var i = 0, n = array.length;
  if( i < n ) do {
  var item = array[i];
  // do stuff with item
  while( ++i < n );
  But neither one is any faster than the more readable for loop.
  To iterate over an object (not an array), you can use a loop:
  for( var key in object ) {
  var item = object[key];
  // do stuff with item